10mm Closed Cell Stock Foamed Aluminium Sheet
Features foam aluminum plate: foam aluminum bare plate retains the essence of is aluminum, silver gray metal appearance, Class A1 fire protection, corrosion resistance, aging resistance, smooth surface without hurting hands, natural and beautiful, uniform color, and suitable for large area building pavement engineering. The product has passed the test of the national testing agency, and meets the requirements of JG/T359-2012 foam Aluminum Plate for Building, which is safe, reliable and quality guaranteed.
Product description:
The 5mm closed-hole stock foamed aluminum sheet measuring 1 meter by 2 meters is a type of aluminum sheet with a thickness of 5mm and a size of 1 meter in width by 2 meters in length. This type of aluminum sheet is characterized by having a closed-hole structure, which typically refers to the presence of small, uniformly distributed closed holes or perforations on the surface of the sheet.
Aluminum foam is a new type of light metal material produced by foaming aluminum alloy using the principle of bionic structure. It is light and strong, with a density lower than water. It has many excellent properties such as sound insulation and noise reduction, electromagnetic shielding, energy absorption buffering, flame retardant and explosion-proof, and is known as Widely used in transportation facilities, architectural decoration, military aerospace, civilian panels and equipment manufacturing and other fields.
Product parameters:
Stock size:60cm*120cm can customized any size
Thickness :5mm 10mm others can customized
The surface is bright, silver gray aluminum metal essence, with uniform aperture, A1 grade fire resistance, corrosion resistance,anti-aging,smooth surface, easy to clean, suitable for indoor and outdoor decoration
Product Classification:
1.Closed cell aluminum foam sheet
2.Through-hole aluminum foam Closed cell aluminum foam sheet plate (transparent plate)
3.Aluminum foam color plate
4.Aluminum foam composite board
Decorative effect display:
Foam aluminum transparent panel display
Foam aluminum wall decoration
Foam aluminum ceiling decoration
Foam Aluminum Exhibition
Installation guidance plan:
Scheme 1: Wall installation, fixed by card slot and adhesive
1. The wall is leveled to ensure that the wall is smooth, lay a layer of wood base on the wall, and fix it to the wall with a nail gun;
2.Set the wire, plan the installation position, and determine the size of the aluminum foam sheet;
3. Install the end interface card slot and fix it on the wooden base with screws
4. Apply adhesive on the back of aluminum foam sheet. The adhesive form can be spot adhesive or surface adhesive, and the adhesive area is not less
than 2% of the plate area, with uniform distribution;
5. Install the aluminum foam sheet in the predetermined position, and the edge is matched with the receiving slot;
6. Install the middle card slot, match with the other end of the aluminum foam sheet, and then fix it on the wood base with screws;
7. In accordance with the above method, fix the remaining plates on the wall in turn
Solution 2: Directly installed on the wall
When the wall is suitable for bonding, the aluminum foam sheet can be directly glued to the wall;
When the wall is not applicable and bonded, the aluminum foam sheet can be fixed on the wall with gun nails. The adjacent plates can be directly buttressed or gaps reserved for later use of T-shaped laminates to cover and fill.
Scheme 3: Keel support installation of the aluminum foam sheet
1. Install the keel according to the size and installation direction of the aluminum foam sheet;
2. Lap between aluminum foam sheet and keel, and then use self-tapping nails or nail gun to connect and fix;
3. When the keel is narrow, it can also be fixed by layering.
Scheme 4: The use of several types of slot fixed connection
The method is suitable for wall and ceiling keel installation.
1.Several strip sare placed in the installation gaps of adjacent aluminum foam sheets as
2.Support pieces between sheets,and then fixed to the wall or keel by screws. The
3.Connected grooves can be modified by decorative strips or lamp strips.
Solution 5: Hanging installation
1. First, install Z-shaped slide on the wall or keel for the fixed installation of aluminum foam plate;
2. Install mounting ears on the back of the aluminum foam plate. The mounting ears are U-shaped, and their wider sides are glued to the aluminum foam plate
3. After the rubber layer dries and solidifies, hang the aluminum foam sheet onto the guide rails.
Pakage:
Wooden box
Related Products
Related News
Submitted successfully
We will contact you as soon as possible